Applying TWP and Olympic deck stains
Olympic deck stain that is semi-transparent stain only requires 1 coat. Twp as well only requires 1 coat. If more coats are desired they need to be thinned down based on how the first coat took to the wood. Many companies either put on too much stain or not enough. Spraying the stain will puddle under the rails and looks very unprofessional. Most start up companies like to spray their stain and back brush it. This is where most puddling will occur. I am speaking from experience because that was how I was taught 19 years ago until I was shown the right way, which is brush out the entire deck including the rails. By spraying oil stain ot gets air borne it never dries and will kill everything it touches. By bushing you also get a feel on how much stain the wood will absorb. Usually one and a half coats is the right amout to have the floor look even and a closer match to the rails. The temperature will play a big role as to how well the floor will turn out. When temps are 50-60 degrees the product flashes slower and sets up better than much higher temps.



Nice writing. You are on my RSS reader now so I can read more from you down the road.
I never would have thought I would be required to understand this thank goodness for the web, right?
Well, this is my primary check out for your webpage! We’re a group of volunteers and commencing a brand new initiative in a community in the identical niche. Your weblog offered us useful data to work on. You have done a marvellous occupation!